Search Crusher Wear Parts
Q/A Archives
February 2009
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| « Dec | Mar » | |||||
| 1 | ||||||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| 9 | 10 | 11 | 12 | 13 | 14 | 15 |
| 16 | 17 | 18 | 19 | 20 | 21 | 22 |
| 23 | 24 | 25 | 26 | 27 | 28 | |
Sign-up for RSS
Bridging in Jaw
Posted by Dan from Pickering, ON, CA on February 10, 2009
We replaced the jaw dies in our 32 40 jaw with dies recommended by our supplier for recycling concrete. The stationary jaw has smooth sides. Material begins to bridge on the side and spreads across entire jaw untill jaw plugs. Any suggestions?
The problem described typically occurs when there is too large of a void between the edge of the jaw & the cheek plate. Usually when the void is filled in on the casting, it eliminates the situation described. In order to diagnose your problem correctly, I would need to visually see the situation you have described. Photos would be best. You can email photos to me at steve_dz@columbiasteel.com if you would like me to take a closer look.